Chimney Repairs, Leadwork & Pointing
Repointing, rebuilds, leadwork flashings, caps and cowls.
Chimneys and leadwork take the worst of the weather and are two of the most common causes of damp patches on upstairs ceilings and walls. We repoint, re-flash, repair leadwork and where necessary rebuild chimney stacks safely from scaffold.
What's included
- Repointing in matched mortar
- Partial or full chimney stack rebuilds
- New lead flashings, soakers, back gutters and leadwork repairs
- Chimney caps, cowls and pot replacement
- Redundant stack removal and roof made good
All chimney repairs, leadwork & pointing work is carried out by our own experienced roofers across Exeter, Bristol and the surrounding areas, backed by a free written quotation before anything starts.
Chimney repairs in Exeter, Bristol and the surrounding areas
Your chimney takes a beating. It sticks up above the roof, so it gets the worst of the wind, rain and frost. Over time the mortar crumbles, the pots loosen and the flashing pulls away. Then water finds its way into your home.
Intact Roofing repairs chimneys across Exeter, Bristol and the surrounding areas. We fix the cause, not just the stain on your ceiling. We'll explain what's wrong and what it needs.
Worried about your chimney? Call 01392 984254 or send a message for a free quote.
Signs your chimney needs work
- Damp patches or brown stains on the chimney breast inside
- Crumbling or missing mortar between the bricks
- Bricks with flaking or crumbling faces
- A leaning stack or visible cracks
- Loose or cracked chimney pots
- Cracked or missing cement around the base of the pots (this is called flaunching)
- Lead flashing lifting away where the chimney meets the roof
- Bits of mortar or soot in the fireplace
You can often see some of these from the ground. Use binoculars if you like, but please don't climb up to check.
The chimney repairs we do
Repointing
We rake out the loose mortar and repoint with a mix that suits your bricks. Using the wrong mortar can damage older brickwork, so we take care over this.
Flaunching
Flaunching is the mortar that holds the pots in place and sheds water. When it cracks, rain gets into the stack. We replace it so the pots sit firm and the water runs off.
Chimney pots and caps
We refit loose pots and replace damaged ones. If you have a disused flue, we can fit a vented cap. It keeps the rain out and lets air move through, which helps stop damp forming inside the chimney.
Lead flashings and trays
The joint between the chimney and the roof is a common place for leaks. We fit new lead flashings, and a tray or back gutter where it's needed, so water is carried away from the stack.
Chimney rebuilds
If the top of the stack is past repair, we can take it down and rebuild it. We'll reuse bricks where they're sound and match the look of your home.
Repair or rebuild?
Most chimneys only need repointing, new flaunching or new flashing. A rebuild is for when the brickwork has broken down or the stack is leaning. We won't rebuild what we can repair. If we think a rebuild is needed, we'll show you why.
Sweeping and fire safety
Repairing the stack doesn't replace regular sweeping. If you use a fireplace or wood burner, have the flue swept and checked by a qualified chimney sweep.
Why choose Intact Roofing for chimney repairs
- We find the real cause. Damp on a chimney breast can have a few sources, so we check the whole stack and the roof around it.
- Honest advice. Repair where we can, rebuild only where we must.
- Safe access. Chimneys are high and awkward. We use the right equipment to work on them safely.
- Clear quotes. A fixed price in writing before we start.
- A guarantee on the finished work — ask us for the details with your quote.
Chimney repair questions
- Why is my chimney breast damp?
- Water can get in through the pot, the flaunching, the brickwork or the flashing. Sometimes the cause is a capped chimney with no ventilation. We check outside and in the loft to find the real cause.
- Is a leaning chimney dangerous?
- It can be. A stack that leans or has big cracks could drop bricks. Keep people away from underneath it and call us to take a look.
- Do I need scaffolding for chimney work?
- Often, yes. Depending on the height and the job, we may use scaffolding or a tower for safe access. We'll tell you before we start.
- How long does a chimney repair take?
- Repointing or new flaunching often takes about a day. A rebuild takes longer, and mortar needs time to set. We'll give you a timeline in your quote.
Areas we cover
We repair chimneys across Exeter, Bristol and the surrounding areas, including Devon, Somerset and Gloucestershire. Towns we regularly work in include Exmouth, Taunton, Bath, Weston-super-Mare, Tiverton, Honiton, Newton Abbot, Torquay, Yeovil, Bridgwater, Gloucester and Swindon. Live somewhere else nearby? Get in touch and we'll let you know.
Get your chimney checked
Call us on 01392 984254 or send a message. We'll look at the stack and the roof around it, explain what we find and give you a fixed price.
Get a free quote: call 01392 984254 or use the contact form below.